NEEDED: Peavey Cirrus Bass 5str Onboard Preamp schematic

[tv]

For the neck-thru-body version with active pickups.

I was told that Peavey MILLENIA preamp schematic could be useful as well (with sweeping mids ???).

If someone knows how to get it / or have it, please let me know or please post it here.

(Only place I found it on net, is here (scroll down):
http://www.schematicconnection.com/store/asp/prodtype.asp?prodtype=150

but that page seems unreliable - I read some about owner's health problems etc. note on the frontpage ... )

 

[tv]

Bump. Still needed.

 

[Stingray5funk]

same

 

[JohnRoberts]

Did you try Peavey customer service?

JR

edit- I am not familiar with guitar models but back in the 90s I helped a junior engineer in the peavey digital group with some ideas for a JFET based preamp.. I just pointed him in a good direction. /edit

 

[Stingray5funk]

Did you try Peavey customer service?

JR

edit- I am not familiar with guitar models but back in the 90s I helped a junior engineer in the peavey digital group with some ideas for a JFET based preamp.. I just pointed him in a good direction. /edit

Just made a thread unfortunately PV no longer manufactures the cirrus bass or millennium
The difference is the millennium had the sweepable frequency mid control

The Cirrus had the same preamp. Almost similar voicing but the med control was not sweepable

they’ve discontinued the bass and parts

 

[Stingray5funk]

Did you try Peavey customer service?

JR

edit- I am not familiar with guitar models but back in the 90s I helped a junior engineer in the peavey digital group with some ideas for a JFET based preamp.. I just pointed him in a good direction. /edit

I do have a schematic but if someone can remake it as a gerber he’ll even a smaller footprint with wire leads to go to the pots

then that would be amazing !

 

[JMan]

You'll definitely want to provide the schematic (I saw in your other thread that you have a picture, but that doesn't offer enough information unfortunately). Have you tried posting in the Jobs Available section? You might get a bite there if you're offering a bit of compensation for the trouble.

 

[Stingray5funk]

You'll definitely want to provide the schematic (I saw in your other thread that you have a picture, but that doesn't offer enough information unfortunately). Have you tried posting in the Jobs Available section? You might get a bite there if you're offering a bit of compensation for the trouble.

https://drive.google.com/file/d/11hfljjuu0rgMuiS_-4sZdlc1mhYjsMLb/view?usp=drivesdk

 

[Stingray5funk]

Here

 

[greg szy]

I do have a schematic but if someone can remake it as a gerber he’ll even a smaller footprint with wire leads to go to the pots

then that would be amazing !

I copied that Millennium Preamp schematic. I is the same as Cirrus preamp? I will redraw it in OrCAD then I will see if I can design new board (gerber file). OcCAD I know well but the software for PCB is less familiar to me. I will try. I want put Cirrus pickups and preamp on my Grind5