Neve- Channel Module 8128 Schematic Anyone?

[Mark Burnley]

Hi,

Just wondering if anyone could rummage through their schematic archives and see if they had the pan/fader buffer/routing card schematics for the Neve 8128 channel module?

I'm just missing the schems for the EV10973/E and EV10974/D boards (which make up the lower part of the channel strip)

Tried all the usual lines of enquiry!

Thanks for your help,

Mark

 

[Bookkeeper]

have manual, both volumes, ba973a and ba974a a1sheet (2+1),can make a hard copy, send a postal address .milos

 

[Mark Burnley]

Cheers Milos,

PM sent!

Many thanks,

Mark

 

[QUEEF BAG]

if you recap that puppy, I would recommend panasonic FM
caps- 120uf/16 volts in place of the 100uf caps.
That goes for the rest of the module sections too.

Digikey seems to be the best source for panasonic caps.

I would not worry about upgrading the chips, even the quad opamps,
as long as they are the Harris chips.

 

[Mark Burnley]

Yep,

Found a stash of the Harris chips- so good there!

Will check out the FM's

Thanks!

Mark

 

[Sycamore_Sounds]

have manual, both volumes, ba973a and ba974a a1sheet (2+1),can make a hard copy, send a postal address .milos

Do you still have NEVE 8128 Schematics?? I'd pay for access to that!

 

[MarkHorn]

Tried to post it but the file is too large (46M). If you give me an email address I can WeTransfer it.

 

[Whoops]

Tried to post it but the file is too large (46M). If you give me an email address I can WeTransfer it.

Sent you a PM

thanks