New Design 1176 Boards + 900 Power Supply Boards

[sl4zhz]

Hi MNATS,

I just receive the PCBs.. thanks..
is the attick and ratio pcb works for 4 push switch button? it looks like yours is for the rotary type?
do you have the wiring instruction for 4 switch button ?

thanks

 

[mnats]

is the attick and ratio pcb works for 4 push switch button? it looks like yours is for the rotary type?

The ratio and meter boards are for rotary switches as listed on my board sales page. They have the same components so I suppose you could use them for push buttons, but why not use the ones supplied by Hairball?

do you have the wiring instruction for 4 switch button ?

There is a link to the new wiring pages in the email acknowledgment I sent when you ordered your boards. Or just look at my website.

 

[sl4zhz]

is the attick and ratio pcb works for 4 push switch button? it looks like yours is for the rotary type?

The ratio and meter boards are for rotary switches as listed on my board sales page. They have the same components so I suppose you could use them for push buttons, but why not use the ones supplied by Hairball?

do you have the wiring instruction for 4 switch button ?

There is a link to the new wiring pages in the email acknowledgment I sent when you ordered your boards. Or just look at my website.

I thought its the same pcb with the one supplied at hairball..
thanks for your reply MNATS. I'll check your links for the wiring instruction..
thanks

 

[ltronsm]

Just ordered a 1176 rev D board from you but paypal gave you the wrong adress.. Can you send me a PM/email for the right adress?

Lars

 

[ln76d]

Dear Mako!

Two sets of PCB arrived!

They're great!

I've almost finished soldering!

Best regards

Piotr

 

[JeffTD]

Just got confirmation e-mail; if it won't ship until August 28th then I need to provide you with a different shipping address; please e-mail me for that. JeffTD -at- Gmail -dot- com

 

[sl4zhz]

is the attick and ratio pcb works for 4 push switch button? it looks like yours is for the rotary type?

The ratio and meter boards are for rotary switches as listed on my board sales page. They have the same components so I suppose you could use them for push buttons, but why not use the ones supplied by Hairball?

do you have the wiring instruction for 4 switch button ?

There is a link to the new wiring pages in the email acknowledgment I sent when you ordered your boards. Or just look at my website.

So is it possible for me to use the ROTARY PCB on a Push on button ? If yes, do you mind post the wiring and instruction?
appreciate it if you like to help. thanks alot

 

[mnats]

Please post questions concerning projects to their respective thread. As noted in the first post the price of boards does not include individual technical support.

Hi!

This question is directed to Mnats!

I ordered a Hairballaudio-kit rev D about a month ago. It was also supposed to include Mnats PCB-kit.

I would just like to know that it was shipped when it was supposed to.

Conversely, please post questions like this one from the Rev D thread to the this thread.

If you are referring to unique transaction 74J30411XS3400243 it shipped on the 22nd of August 2012. As noted in the acknowledgment email you received, if shipping had been delayed you would have been notified in a separate email.

 

[liljeblad]

Sorry about that!

I knew there was such a thread somewhere on the website. I just didn't know where.

Good to know! I just wonder if you have a tracking or id number so I can track and pick it up. There seems to be something wrong with the post office here. I didn't receive an avi(don't know if it's the same in english -  but a mail that said that my package had arrived). So I have to go and find out for myself or they'll send it back.


Hope I'm not troubling you!

 

[mnats]

Sorry about that!

I knew there was such a thread somewhere on the website. I just didn't know where.

Good to know! I just wonder if you have a tracking or id number so I can track and pick it up.

A link to this thread and an answer to your question are both contained in the order acknowledgment email you were sent.

 

[liljeblad]

Sorry about that!

I knew there was such a thread somewhere on the website. I just didn't know where.

Good to know! I just wonder if you have a tracking or id number so I can track and pick it up.

A link to this thread and an answer to your question are both contained in the order acknowledgment email you were sent.

No.

I did not receive a separate email regarding the PCB set. The only email I got was from Hairball audio, and that email only contained information about the package that they sent. There was no more info about the PCBs other than that I had paid for them.

 

[mnats]

No.

I did not receive a separate email regarding the PCB set. The only email I got was from Hairball audio, and that email only contained information about the package that they sent. There was no more info about the PCBs other than that I had paid for them.

Sorry, I was confused when you wrote "I would just like to know that it was shipped when it was supposed to." I thought you were referring to the acknowledgement email since Hairball does not know when the boards will ship.

The acknowledgement emails are sent BCC to several addresses which sometimes mean they end up in junk mailboxes. There's a full post of the acknowledgement email on the previous page of this thread and full information in the first post about (lack of) tracking.

 

[masterminds]

Just ordered my first board, very excited about it. How long does it take to get an aknowlegement email?
Thanks

 

[mnats]

Just ordered my first board, very excited about it. How long does it take to get an aknowlegement email?
Thanks

It varies. This morning, when your order came in, I spent the time packing it and two other overnight orders instead of sending the acknowledgments. Unfortunately I had a very full work schedule today and did not have time to send them off so in retrospect I should have sent emails instead...

 

[masterminds]

Awsome, got it...thanks a bunch...Cheers.

Just ordered my first board, very excited about it. How long does it take to get an aknowlegement email?
Thanks

It varies. This morning, when your order came in, I spent the time packing it and two other overnight orders instead of sending the acknowledgments. Unfortunately I had a very full work schedule today and did not have time to send them off so in retrospect I should have sent emails instead...

 

[Spaturno]

i ordered the 1176 Board the 13.10.2012 and i still did not receive any confirm or answer. there is some problem?

 

[mnats]

i ordered the 1176 Board the 13.10.2012 and i still did not receive any confirm or answer. there is some problem?

Yes, it looks like Hotmail failed to properly send the acknowledgement email. I have re-sent it. Your boards shipped on the 15th of October 2012.

 

[Spaturno]

i ordered the 1176 Board the 13.10.2012 and i still did not receive any confirm or answer. there is some problem?

Yes, it looks like Hotmail failed to properly send the acknowledgement email. I have re-sent it. Your boards shipped on the 15th of October 2012.

Still did not receive the board. Is it possible to track it? Thanks.

 

[mnats]

Still did not receive the board. Is it possible to track it? Thanks.

As indicated in the acknowledgement email, the board ordering page and the FAQ, there is no tracking on regular airmail.

I ask that you give it another week. Let me know if it doesn't show up by then I'll send another set of boards.

 

[Spaturno]

today i receive the board... when i#m finish with this i gonna buy the second one