UC
New member
I?m planning on putting together a comprehensive step by step webpage/guide to racking up a pair of PM1000 modules. I know there are a few helpful guides out there, but none of them really get into detailed specifics. I?d like to include descriptions of every part needed, as well as direct links to where these parts can be ordered online etc. I also plan on including very detailed easy to follow instructions. I?ve read every PM1000 post on just about every forum, and read all I could find online, and I just got my 2 modules in the mail from ebay. This is my first electronics project. After reading everything it still seems almost impossible, but I?m going to work through it and document everything along the way to make it easier for others in the future.
I know a lot of you guys have already racked these up, and I think it?s a great beginner?s DIY project. If any of you know of specific parts/links, or any other info and would like to contribute please reply. I?d appreciated it and I?m sure a lot of other people would as well. I?d like to include standard parts/prices, as well as cheap alternatives when possible.
PM1000 Manual/Schematics:
http://www2.yamaha.co.jp/manual/pdf/pa/english/mixers/PM1000E_1.pdf
http://www2.yamaha.co.jp/manual/pdf/pa/english/mixers/PM1000E_2.pdf
Weller Soldering station - $49.00
http://www.action-electronics.com/wewlc100.htm
Weller De-soldering pump - $19.20
http://www.hmcelectronics.com/cgi-bin/scripts/product/1980-0337
Enclosure - Par Metal Model: 10-19173x (19W x 17D x 3.5H) - 10- $63.50
http://www.par-metal.com/plist.htm
Cheaper Alternative ? old cheap rack gear on Ebay to gut
Power Supply
Power One Model: HB48-0.5-A
Digikey Part No: 179-2034-ND
48VDC / 0.5 Amp Linear Power supply
http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail?Ref=184&Row=432623&Site=US
Diodes
Small PCB to mount PSU step down diodes
Wires
XLR in
XLR out
1/4" balanced out
1/4" in ?
Output transformer
Phantom power switch
Phase switch
Power switch
Caps
Panasonic SE caps?
LED
I know a lot of you guys have already racked these up, and I think it?s a great beginner?s DIY project. If any of you know of specific parts/links, or any other info and would like to contribute please reply. I?d appreciated it and I?m sure a lot of other people would as well. I?d like to include standard parts/prices, as well as cheap alternatives when possible.
PM1000 Manual/Schematics:
http://www2.yamaha.co.jp/manual/pdf/pa/english/mixers/PM1000E_1.pdf
http://www2.yamaha.co.jp/manual/pdf/pa/english/mixers/PM1000E_2.pdf
Weller Soldering station - $49.00
http://www.action-electronics.com/wewlc100.htm
Weller De-soldering pump - $19.20
http://www.hmcelectronics.com/cgi-bin/scripts/product/1980-0337
Enclosure - Par Metal Model: 10-19173x (19W x 17D x 3.5H) - 10- $63.50
http://www.par-metal.com/plist.htm
Cheaper Alternative ? old cheap rack gear on Ebay to gut
Power Supply
Power One Model: HB48-0.5-A
Digikey Part No: 179-2034-ND
48VDC / 0.5 Amp Linear Power supply
http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail?Ref=184&Row=432623&Site=US
Diodes
Small PCB to mount PSU step down diodes
Wires
XLR in
XLR out
1/4" balanced out
1/4" in ?
Output transformer
Phantom power switch
Phase switch
Power switch
Caps
Panasonic SE caps?
LED