CJ Well-known member GDIY Supporter Joined Jun 3, 2004 Messages 15,745 Location California Oct 30, 2008 #21 Here is a snap shot out of an old Heath Kit manual. No CAD programs back then.
T tv Well-known member Joined Feb 22, 2006 Messages 1,459 Oct 30, 2008 #22 http://www.welbornelabs.com/drd.htm from site:
Kingston Well-known member Joined Nov 1, 2005 Messages 3,717 Location Helsinki, Finland Oct 30, 2008 #23 Nice one. Super clean. found this somewhere here by accident. Luckily the pictures were still up. Very crowded, but still neat. http://cgi.ebay.com/INWARD-CONNECTIONS-VAC-RAC-10-CH-MIC-TUBE-PREAMPLIER_W0QQitemZ350080234449QQihZ022QQcategoryZ119018QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Nice one. Super clean. found this somewhere here by accident. Luckily the pictures were still up. Very crowded, but still neat. http://cgi.ebay.com/INWARD-CONNECTIONS-VAC-RAC-10-CH-MIC-TUBE-PREAMPLIER_W0QQitemZ350080234449QQihZ022QQcategoryZ119018QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
T tv Well-known member Joined Feb 22, 2006 Messages 1,459 Oct 30, 2008 #24 Yep clean... For some reason the bay page screws my browser... http://www.geofex.com/Article_Folders/pt-to-pt/pt-to-pt.htm This is some basic no-nonsense stuff. May come in handy before you take some paper and pencil your layout down...
Yep clean... For some reason the bay page screws my browser... http://www.geofex.com/Article_Folders/pt-to-pt/pt-to-pt.htm This is some basic no-nonsense stuff. May come in handy before you take some paper and pencil your layout down...
Kingston Well-known member Joined Nov 1, 2005 Messages 3,717 Location Helsinki, Finland Oct 31, 2008 #25 That's the best article on this topic I have ever read. Could not have been better dissected. I can already see what the biggest problem of my previous build was based on that. Thanks a lot. I think I'm ready to start now.
That's the best article on this topic I have ever read. Could not have been better dissected. I can already see what the biggest problem of my previous build was based on that. Thanks a lot. I think I'm ready to start now.
T tv Well-known member Joined Feb 22, 2006 Messages 1,459 Oct 31, 2008 #26 Hey, cool - are you posting some photos when done?
Kingston Well-known member Joined Nov 1, 2005 Messages 3,717 Location Helsinki, Finland Oct 31, 2008 #27 of course!