Getting ready to rack up a pair of Altec 459a's...looking for a good power supply kit. I've done plenty of lower voltage rack jobs with solid state pres (Altec 9470s, Spectrasonics 101s, etc.) with the Five Fish 2448 and the JLM supplies, but I'm striking out finding an equivalent for tube gear. Schematic shows a 6.3V/1.6A and 275V/40mA requirement, and obviously I'd like to over-spec on amperage to make sure I have more than enough for both models. Also I'd prefer a kit that comes with a transformer. Any recommendations would be greatly appreciated!
http://www225.pair.com/audio/waltzingbear/Schematics/Altec/Altec_459A.htm
Also, any issues using something like the this Five Fish DC 1248 board on the 6.3V rail to provide 48V for phantom? Any concern with the amperage being too high for phantom?
https://www.fivefishstudios.com/shop/index.php?route=product/product&product_id=88
Thanks!
http://www225.pair.com/audio/waltzingbear/Schematics/Altec/Altec_459A.htm
Also, any issues using something like the this Five Fish DC 1248 board on the 6.3V rail to provide 48V for phantom? Any concern with the amperage being too high for phantom?
https://www.fivefishstudios.com/shop/index.php?route=product/product&product_id=88
Thanks!