ioaudio
Well-known member
this was a very satisfying build - thanks to purusha for housing&info!
finally found a adequate job for the siemens/wsw isolation amps i had lying around for some time . they do sound huge and go perfectly together with the passive filter network of the eqp1.
i took my time building this. first i breadborded the mid/high boost section section to wind my inductors.
with the inductor finished i started to try various capacitors for the right sound, with the wsw isolation amp already connected. i used signal feedback from output to input for oscillation to find the right values for some stereo-matching.
finally i put the inductors into a brass tube for some shielding and mainly for optics
more/bigger pictures can be found here
finally found a adequate job for the siemens/wsw isolation amps i had lying around for some time . they do sound huge and go perfectly together with the passive filter network of the eqp1.
i took my time building this. first i breadborded the mid/high boost section section to wind my inductors.
with the inductor finished i started to try various capacitors for the right sound, with the wsw isolation amp already connected. i used signal feedback from output to input for oscillation to find the right values for some stereo-matching.
finally i put the inductors into a brass tube for some shielding and mainly for optics
more/bigger pictures can be found here