R Tolerances on G9 Mic Pre

[doc]

I am doing some parts shopping to construct the Gyraf G9 and on the resistor tolerances, I have gathered most of the values I need but the tolerances, I have found, are 2%. The specs call for 5%. This a problem?

Also, I am finding that the Lundahl transformers are a bit on the pricey side if I buy them from a dealer. Any suggestions?

Doc

 

[Ilya]

Generally 2% tolerance is better that 5%, so it shouldn't be a problem. As for me I try to use 1% metal film resistors for my projects if it's possible.
Good transformers cost money, I don't think that you'd be able to find any good AND cheap transformer It's much more like good OR cheap :razz:
Anyway, you don't want your DIY stuff to sound like crap, do you? :wink:

 

[Mbira]

Many people have used the OEP transformers-do a search. I used Lundahls-I love them. Also, this post and any 'project specific' questions are best put in 'The Lab'.

Welcome!
Joel