S800 Support Thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hi 3nity,
          I got them from Selco - http://catalog.selcoproducts.com/viewitems/collet-knobs/basic-collet-knob?&pagenum=2&measuresortid=0

  Knobs - P/N - S151-250 Black  ,  Caps - P/N C151 White
 
where to buy pcbs for this project? or, even better, a self etch file? i tried to search with no results
 
benlindell said:
Updated: I mistakenly had this with 270degree scales, I fixed it up now. New link below
Hey guys. I designed a 4-channel Front panel.  here's the illustrator file: http://benlindell.com/diy/S800%20to%20Laser.ai

Here's pictures of a cardboard prototype:
IMG_0212.jpg

IMG_0217.jpg

IMG_0220.jpg

Hey Ben, I was reading through this thread and you mentioned that you saw some weirdness in the frequency sweeps? Looking at your pictures closely, I think you have a "link (0 ohm) resistor where R41 should be, and a 47k resistor where the link should be. I haven't checked this against the schematic, so this might have nothing to do with the bands that you're having issues with, but I thought I'd point it out. Of course, I could also be horribly wrong.

Really great looking builds regardless.

Mason
 
Anyone here please.
I need to calibrate my pair of S800.
Do i need something special for calibration??
Thanks,
 


Finished four channels in purusha case. Just wanted to give you all a heads up on how they look like with Elma (I think?) knobs that I got off of electrochronic.

Cheers and thanks for an easy and good sounding project!
B.
 

Latest posts

Back
Top