Searching Allen & Heath ZED14 Schematics

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

rock soderstrom

Tour de France
Joined
Oct 14, 2009
Messages
1,890
Location
Berlin
Hi folks, I am searching these schematics for a repair job. I have checked the Internet and the document section here, no success so far.

Cheers
 

rock soderstrom

Tour de France
Joined
Oct 14, 2009
Messages
1,890
Location
Berlin
Is it radically different from other Zed models?
I don't know, but I can imagine that the devices are very similar, especially in the ZED series (plus the model variants with built-in FX). Therefore, the schematics of similar devices would be quite interesting.

Edit: thats what I got so far
 

Attachments

  • allen_heath_zed_series_psu_sch.pdf
    133.3 KB · Views: 12
  • ZED14_schematics.JPG
    ZED14_schematics.JPG
    133.7 KB · Views: 19
Last edited:

rock soderstrom

Tour de France
Joined
Oct 14, 2009
Messages
1,890
Location
Berlin
Here is a schematic of the A&H ZED Mini, a relative of the ZED14, no idea ATM how close it is....
 

Attachments

  • allen_heath_zed-10fx_sm.pdf
    5.6 MB · Views: 17
Last edited:

rock soderstrom

Tour de France
Joined
Oct 14, 2009
Messages
1,890
Location
Berlin
FYI for the following seekers of Allen&Heath schematics and service documents.

Allen&Heath has a zero support policy for external technicians. They do not give out any service documentation.
 

Mictester

New member
Joined
Sep 18, 2014
Messages
3
FYI for the following seekers of Allen&Heath schematics and service documents.

Allen&Heath has a zero support policy for external technicians. They do not give out any service documentation.
That has been my experience too. My radio station had two A&H mixers, and they even refuse to provide details of switches and faders to allow simple repairs. In the end, we sold both mixers, and bought replacement gear from D&R in the Netherlands. The D&R mixers were slightly cheaper than the A&H offerings, with lower noise and distortion. They also provide comprehensive service manuals, and are happy to share their design expertise with anyone.
 

rjb5191

Well-known member
Joined
Oct 26, 2017
Messages
162
Location
Montana, USA
FYI for the following seekers of Allen&Heath schematics and service documents.

Allen&Heath has a zero support policy for external technicians. They do not give out any service documentation.

They freely gave me the zed R16 schematic but it is discontinued of course. Maybe that schematic is somewhat similar enough to help.
 

rock soderstrom

Tour de France
Joined
Oct 14, 2009
Messages
1,890
Location
Berlin
They freely gave me the zed R16 schematic but it is discontinued of course. Maybe that schematic is somewhat similar enough to help.
Thanks for thinking of me, but I don't need the schematic anymore since I was able to fix the problem and sold the console.

I am back to Mackie for my home "studio", I found the A&H mixer unconvincing.

Please put the schematic here in the documentation section for future requests.
 
Top