Gee, thanks guys! I've pulled plenty of stranded, (and solid) wire so I know about lube and I have a good fish tape. I've just never pulled any audio wire. I was concerned about pulling the jacket apart or opening the shield. That's why the Canare L-4E4-4AT 4-Channel Star Quad made sense. The 8-channel is just a bit more a foot, (and I can get it by the foot!), so I might talk the owner into using it.
The conduit is existing and I don't know the size, what and how may wires are in it yet. I do know that there are five CAT5. I hope there is no AC in there! I was told there are at least two sweeps and possibly two boxes in the run. It's underground so we'll have to dig the boxes up! I was going to check that out today but they had a wedding going on, LOL.
I looked at the L4E5c but it's a lighter version of the Star Quad and again, I'm concerned about pulling it apart! Canare MR202, this is interesting, hadn't looked at it. Do you guys think that the two conductor vs the Star Quad would make that much difference? With the 8AT i could run eight channels for $2/ft! However it's 25 AWG and I try to stay away from the lighter gauge wire. Also the L-4E4 has that Kevlar core. Comments?
I'm just pulling the wire through, no connectors. It will terminate in a sealed box outside in the pavilion. I'm going to make up every thing i can in a separate box and use barrier strips to make the connections. Then I'll just have to install the mixer, the connectors box etc. in the field, pull the wire and make the connections. Viola! Couldn't be easier! (Ha. That'll be the day!)
Thanks again for all the good comments!
Paul ;D