and the Ind. vs Level would seem to indicate that these are two identical cores,
DCR is equal, wire size is equal so we have the same turns.
do not want to unwind and rewind, so we take a Mean Length Turn measurement with a thin piece of mylar tape wrapped around the outside and then measure the tape length = 0.75 inches.
wire is 0.0042" which is normally #38 AWG.
#38 = 670 ohms per 1000 ft. we have 18 ohms each coil,
so 18/670 = 0.026865672 x 1000 t = 26.86 ft = 322.38 inches wire length.
so divide length of 1 turn into total length = 322/.75 = 430 turns each coil.
we can get an AL value for the cores now.
L=N^2 AL , L in nano Henries, multiply mH by 1^6 for nano H,
700 mH = 700,000,000 nH / 430^2 = 3785 AL