- Joined
- Nov 15, 2013
- Messages
- 29
Just needs wiring up.
As pictured here: https://www.dropbox.com/s/hicenke65sgupms/IMG_1414.JPG?dl=0
Fully Populated main PCB
Fully Populated switch PCB
90% populated turbo PCB
Super sidechain PCB
Front Panel
Rear Panel
Pre drilled Case
Meter
Toroid power transformer
XLR connectors
Premade jumpers
Jumper headers and crimps
IEC connector
Repairs have been made to the switch PCB 10 pin connector. All pins have been tested for continuity. A fresh PCB can be picked up here for 13 bucks if you'd prefer it to be prettier: http://diy-tubes.com/index.php?route=product/product&product_id=158
$200AUD + Shipping.
125 Euro + Shipping
140USD + Shipping
(Only one, not all three )
As pictured here: https://www.dropbox.com/s/hicenke65sgupms/IMG_1414.JPG?dl=0
Fully Populated main PCB
Fully Populated switch PCB
90% populated turbo PCB
Super sidechain PCB
Front Panel
Rear Panel
Pre drilled Case
Meter
Toroid power transformer
XLR connectors
Premade jumpers
Jumper headers and crimps
IEC connector
Repairs have been made to the switch PCB 10 pin connector. All pins have been tested for continuity. A fresh PCB can be picked up here for 13 bucks if you'd prefer it to be prettier: http://diy-tubes.com/index.php?route=product/product&product_id=158
$200AUD + Shipping.
125 Euro + Shipping
140USD + Shipping
(Only one, not all three )