I was a little unsure if two solid planes are fine or some kind of a capacitor ;Dvolker said:No problem at all. In multilayer pcbs it is always done this way.
You are right, oV on top would fit better to my other PCBs (most with a 0V solid plane on top)moamps said:I would use top plane for 0V, and add a small resistor led combo for indication. The mounting holes should be isolated.
Thank you Ian, I'm aware of this.ruffrecords said:It should be fine bur remember to use thermal reliefs on the connector pads or you may have trouble soldering them.
[silent:arts] said:I was a little unsure if two solid planes are fine or some kind of a capacitor ;D
Enter your email address to join: