nrgrecording
Well-known member
After 2 years of sourcing the right components its nearly done. I know.. one knob is missing in the picture and the screws will be replaced with black ones... and no urei logo at the scale.. but who cares... :wink:
DIY is always nice, you can buy some parts here... and there... and don't need to buy all the parts at one time... Something like a hire-purchase. :green:
The modutec meters are from ebay. Thanks Scenaria for the link one year ago! Knobs and switches are from Andrew. Thanks to Ed, too. :wink:
An attack pot with switch can be found at RS.
Regarding the meter illumination... you'll need sunglasses :green:
I used 12 SMD leds... and they can be bright if you want.
They don't need much space in the racks... the pultecs are better. Only one year left to make some rack filling units. Any ideas?
DIY is always nice, you can buy some parts here... and there... and don't need to buy all the parts at one time... Something like a hire-purchase. :green:
The modutec meters are from ebay. Thanks Scenaria for the link one year ago! Knobs and switches are from Andrew. Thanks to Ed, too. :wink:
An attack pot with switch can be found at RS.
Regarding the meter illumination... you'll need sunglasses :green:
I used 12 SMD leds... and they can be bright if you want.
They don't need much space in the racks... the pultecs are better. Only one year left to make some rack filling units. Any ideas?