DenDer
Active member
Hi guys,
I've had these boards ( rev 7 ) lying around for quiet some time now and last week i saw the light and started soldering this bb's up.
I'm constructing a Dual Stereo Compressor which i will house in an old busted Akai sampler that i bought for 50 euro's. ;D Actually a nice move since its already has a power supply and XLR connectors.
So at the moment i'm designing my frontpanel that i'll send to Schaeffer. It is getting wicked 8) but i need to know how many holes there are to drill.........
Now for some questions.
I want to apply the HPF boards designed by Steffen and the the Turbo boards. Now i've did some reading about all of this and came to the conclusion that if i want to apply the Turbo mod i'll have to construct dual HPF boards. In my case 2x dual HPF boards and off course 2x Turbo boards.
What i want to know is in the manual of the Turbo mod i read that i've to use a dual gang switch on the HPF boards. So does this mean i can use one Lorlin that switches both at the same time?
And the 10K pot/trimmer is that an inboard one or does that one go to the frontpanel to?
And if i read the instructions on the Turbo mod well there is one extra hole to be drilled in the frontpanel if i'm making it switchable.
So to summen things up for the holes to drill:
Ratio, Attack, Release, Make Up, Treshold, Bypass. these are standard holes of the GSSL.
HPF mod and Turbo mod: Turbo bypass switch, HPF select switch.
Any links to other threads will do by the way.
Thanx in advance, Dennis
I've had these boards ( rev 7 ) lying around for quiet some time now and last week i saw the light and started soldering this bb's up.
I'm constructing a Dual Stereo Compressor which i will house in an old busted Akai sampler that i bought for 50 euro's. ;D Actually a nice move since its already has a power supply and XLR connectors.
So at the moment i'm designing my frontpanel that i'll send to Schaeffer. It is getting wicked 8) but i need to know how many holes there are to drill.........
Now for some questions.
I want to apply the HPF boards designed by Steffen and the the Turbo boards. Now i've did some reading about all of this and came to the conclusion that if i want to apply the Turbo mod i'll have to construct dual HPF boards. In my case 2x dual HPF boards and off course 2x Turbo boards.
What i want to know is in the manual of the Turbo mod i read that i've to use a dual gang switch on the HPF boards. So does this mean i can use one Lorlin that switches both at the same time?
And the 10K pot/trimmer is that an inboard one or does that one go to the frontpanel to?
And if i read the instructions on the Turbo mod well there is one extra hole to be drilled in the frontpanel if i'm making it switchable.
So to summen things up for the holes to drill:
Ratio, Attack, Release, Make Up, Treshold, Bypass. these are standard holes of the GSSL.
HPF mod and Turbo mod: Turbo bypass switch, HPF select switch.
Any links to other threads will do by the way.
Thanx in advance, Dennis