Greg
Well-known member
I've got to calibrate one of these later this week.
When connecting my voltmeter for level calibrations, the service manual recommends terminating with a 600 ohm resistor, but the tape machine will actually be loaded by ProTools inputs. Would it be a better idea to load with a 10K resistor (or perhaps take a look at the PT input Z and use that)?
Thoughts?
When connecting my voltmeter for level calibrations, the service manual recommends terminating with a 600 ohm resistor, but the tape machine will actually be loaded by ProTools inputs. Would it be a better idea to load with a 10K resistor (or perhaps take a look at the PT input Z and use that)?
Thoughts?