This is an indispensable tool for guitar rigs, and I'm trying to figure out how it works and if it's possible to achieve a speaker jack to line out conversion some other crafty (read cheaper!) DIY way. I've googled some other methods that use a couple resistors in a simple circuit, but they're a bit too quick and dirty = not true line out. Before I shell out 180$ I figured I'd submit this to the hive mind. Something else to consider is that, for my particular application, one amp is a Bassman head that has 2 external speaker jacks in parallel and wants to see a total 4 ohm load. The other amp is a MusicMan that also has 2 external speaker jacks in parallel but has a 4 and an 8 ohm tap.
Thanks for helpin'!
Thanks for helpin'!