damien
Well-known member
Will open mine tomorrow and share the pictures here and on the capsule thread 
t. bone SC1100 aka Feilo Z3300 modding, anyone?
- Thread starter theaterguy
- Start date
Help Support GroupDIY Audio Forum:
damien
Well-known member
Here we go, the pictures of the 1st gen of SC1100 :
Got the same (pair) exactly
Back on the SC1100 mods...
Today, I replaced the original mounting saddle by a custom one (that I've already presented earlier in this thread).
I did this mounting mod because Ari doesn't fit the original SC1100 saddle and also because it's now possible to center vertically the capsule in the head basket. As I did, the caps. is ~1cm down and centered.
I used Arienne K47 saddle (because Arienne will be installed later in this pair) but with an Ali Express capsule which will be tested compared to SC1100 original then to Ari K47flat.
For those interested, I post some picts and a schematic of how I did with plastic & metal spacers, an adhesive foam disk and 3mm screw + nut. The 2 plastic spacers allow to "compensate" the hole in the middle and so to offer a solid base. It allows to center the saddle too.
I can give the links to the different parts for this mod (Ali Express).
When I plugged the mic > no sound... I searched... and then realized that the backplate was maybe in contact with the head of the screw (and so with ground). That was it ! so not forget to put a piece of isolant (electrician tape for ex.) between the saddle and the capsule
Today, I replaced the original mounting saddle by a custom one (that I've already presented earlier in this thread).
I did this mounting mod because Ari doesn't fit the original SC1100 saddle and also because it's now possible to center vertically the capsule in the head basket. As I did, the caps. is ~1cm down and centered.
I used Arienne K47 saddle (because Arienne will be installed later in this pair) but with an Ali Express capsule which will be tested compared to SC1100 original then to Ari K47flat.
For those interested, I post some picts and a schematic of how I did with plastic & metal spacers, an adhesive foam disk and 3mm screw + nut. The 2 plastic spacers allow to "compensate" the hole in the middle and so to offer a solid base. It allows to center the saddle too.
I can give the links to the different parts for this mod (Ali Express).
When I plugged the mic > no sound... I searched... and then realized that the backplate was maybe in contact with the head of the screw (and so with ground). That was it ! so not forget to put a piece of isolant (electrician tape for ex.) between the saddle and the capsule
Attachments
Last edited:
So audio tests to come :
1) original SC1100 capsule in Mic 1 vs Ali Express capsule (sold as a K47...) in Mic 2
2) Ali capsule in Mic 2 vs Arienne K47 flat in Mic 1
And then put the second Ari K47f in the Mic 2 to get a nice pair
1) original SC1100 capsule in Mic 1 vs Ali Express capsule (sold as a K47...) in Mic 2
2) Ali capsule in Mic 2 vs Arienne K47 flat in Mic 1
And then put the second Ari K47f in the Mic 2 to get a nice pair
Last edited:
Hi
As I planned here are 2 tracks of voiceover + acoustic guitar (steel strings) recorded with my SC1100 pair.
One with original capsule and the other with an Ali Express one sold as "K47". I have to admit that the Ali is quite interesting, well balanced for my taste, and that the original t.bone capsule is way too bright. They have been recorded thru a XR18 Behringer in which you can visualize the input levels. On voiceover, the original t.bone set to +30dB and the Ali to +36dB, so the Ali needs +6dB compare to t.bone original to get the same recording level. Voiceover ~30cm from the mics. Guitar ~1m from the mics. Cardio mode only.
I find that the Ali is much better on the voiceover : it perhaps lacks a little brilliance on the acoustic guitar but this can be corrected with an EQ (I added a high-pass +4dB from 2,5kHz and it is fine) and since you have to choose... I opt for the Ali.
orig.capsule
AliExpress.capsule
Next audio test will be to replace the original t.bone by Ari K47flat and compare the latter with the Ali
Right capsule on pict is Ali / left original t.bone
As I planned here are 2 tracks of voiceover + acoustic guitar (steel strings) recorded with my SC1100 pair.
One with original capsule and the other with an Ali Express one sold as "K47". I have to admit that the Ali is quite interesting, well balanced for my taste, and that the original t.bone capsule is way too bright. They have been recorded thru a XR18 Behringer in which you can visualize the input levels. On voiceover, the original t.bone set to +30dB and the Ali to +36dB, so the Ali needs +6dB compare to t.bone original to get the same recording level. Voiceover ~30cm from the mics. Guitar ~1m from the mics. Cardio mode only.
I find that the Ali is much better on the voiceover : it perhaps lacks a little brilliance on the acoustic guitar but this can be corrected with an EQ (I added a high-pass +4dB from 2,5kHz and it is fine) and since you have to choose... I opt for the Ali.
orig.capsule
AliExpress.capsule
Next audio test will be to replace the original t.bone by Ari K47flat and compare the latter with the Ali
Right capsule on pict is Ali / left original t.bone
Attachments
Last edited:
Same configuration (distance from mics, recording levels) but in omni mode on both mics (acoustic guitar only)
Ali-caps-omni
t.bone-caps.omni
Ali-caps-omni
t.bone-caps.omni
