t.Bone tube mic power supply

[Nen'O]

Hi,
Are there any differences besides the look in between standard PS used for SCT2000 and nicer looking PS for Retro Tube II?

It's ment to be used for standard CCDA tube mic.

https://www.thomann.de/gr/the_t.bone_psu_retro_tube_ii.htm#bewertung
https://www.thomann.de/gr/the_tbone_psu_sct_2000.htm

Thanks

 

[Khron]

Apart from the form factor, probably / likely not? Not that either is overly complicated or not-moddable...

 

[RuudNL]

From what I have seen they are internally identical.

 

[mhelin]

My Retro Tube PSU had very bad quality wire used, it was already oxidized when I got it (must been old stock). Some wires were cut and separated by itself from the solder joints when I was working on for some mods on the pcb. That PSU looks better out though.

 

[Nen'O]

Thanks for the info!