compresearch
Member
- Joined
- Nov 9, 2014
- Messages
- 9
How best should i test the 1176 for THD? I am thinking of setting the input at noon, sending a 0dBu signal and adjusting the output to read 0VU and then making measurements from there in 2dB increments up to a limit of around +24dBu. At each increase of gain will re-adjust the output so it's reading 0VU
Does that sound correct? I can't find any information on this procedure anywhere online.
Many Thanks
Does that sound correct? I can't find any information on this procedure anywhere online.
Many Thanks