THAT1246 + THAT1646 gain.

[3nity]

I posted this at the GSSL thread.
However i find this interesting to all threads.
I replaced the NE5534s at the input of gssl and NE5532 at outputs by both that1246 and 1646.

however im trying to calibrate this at unity gain (15K ) but that1246 is -6db and 1646 is +6db.
Should i just wire jumper the 15K?? as done by Igor in his Mixbuz?

Compressor sounds and works fine however im not getting unity gain yet.

Thanks

 

[mjrippe]

Use one chip on input and the other on output?  - 6 + 6 = 0