• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

For Sale Transformers measurment PCB.

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I have only 3 PCB's, and sold them now, but if someone interested, please write me, i got new order soon.
 
Something like that? Test Probe i use Amass 20.135.3 Can be XLR socket Amphenol or Plastic Neutrik. Push Button Switch , can be Alps, or Toneluck, or like Redds 500.
 

Attachments

  • BOM 2.jpg
    BOM 2.jpg
    91.7 KB
Last edited:
Measurments from 0Hz to 43kHz. Distortions, Fraquenzy Response, Phase..
 

Attachments

  • Resize of 20221004_223227.jpg
    Resize of 20221004_223227.jpg
    412.2 KB
  • Fonia TPc-5-162 dist.jpg
    Fonia TPc-5-162 dist.jpg
    101 KB
  • Fonia TPc-5-162.jpg
    Fonia TPc-5-162.jpg
    86.7 KB
Yes. Very helpful, if you winding transformers, and for knowledge...
 
The Lorlin datasheets are really low res, but based on previous experience I assume these Alpha switches could be used in place of the Lorlins? Bit cheaper and easier to come by in the USA than Lorlin.

 
Built today. Honestly my build looks terrible, but I don’t care as long as it does what it is supposed to. I only used random stuff from my parts bins (recycled XLR jacks lol, parallel resistors etc)

Great kit Lukas! This will make testing very convenient.
 

Attachments

  • IMG_4737.jpeg
    IMG_4737.jpeg
    1.9 MB
Last edited:
Looks not bad. Con3 have raster 3,96mm so can be here molex 90 degree angle, i give here coper wire 1,5mm(hole dia 1.7mm). I see the other sockets fits well in the I/O boards. Scheme dont have par/series switches.
 

Attachments

  • Pomiar transformatorow.JPG
    Pomiar transformatorow.JPG
    53.1 KB
Back
Top