khstudio
Well-known member
I found 2 Triad Input Transfomers and need some help figuring out what they'd be good for & if there any good.
They look to be about the size of the ouncer's
Side 1
PIN 1 = COMMON
PIN 2 = 150 ohm
PIN 3 = 600 ohm
Side 2
PIN 4 = GND
>>> 60,000 ohm
PIN 5 = GRID
PIN 6 = ??? goes to center (Dotted line)
Power Level = 0 DBM
Any info is good info
I think they might be out of a console... used for the mic inputs.
I'd also like to use them for that, hopfully on one of the mic pre projects here - NYD 1 or 2 bottle, etc... Also, if it is a mic input trans, could I switch between the 150 & 600 ohm for different mics?
Thanks,
Kevin[/img]
They look to be about the size of the ouncer's
Side 1
PIN 1 = COMMON
PIN 2 = 150 ohm
PIN 3 = 600 ohm
Side 2
PIN 4 = GND
>>> 60,000 ohm
PIN 5 = GRID
PIN 6 = ??? goes to center (Dotted line)
Power Level = 0 DBM
Any info is good info
I think they might be out of a console... used for the mic inputs.
I'd also like to use them for that, hopfully on one of the mic pre projects here - NYD 1 or 2 bottle, etc... Also, if it is a mic input trans, could I switch between the 150 & 600 ohm for different mics?
Thanks,
Kevin[/img]