mikep
Well-known member
I need to do a run of small 4-layer PCBs. just under 1 square inch each. at first a prototype run of 10 or so, then hopefully several hundred. problem is, I cannot find a board fab that will allow me to panelize for proto quantities. for 2-layer PCBs there are people who will do pricing based only on square inches, but for 4-layer they all want to do per-board. "no arrays, no step and repeat" etc. best I can find is about $60 per PCB. this just doesnt work for me. does anyone have some advice?
mike p
mike p