• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

For Sale Various parts and components

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sahib

Well-known member
Joined
Aug 19, 2006
Messages
4,003
Location
Glasgow - UK
Vitreous enamel power resistor. New and unused in its original packaging. Military surplus.
140mm long and approximately 30mm in diameter.
15 Ohms 45W. Good as a dummy load for guitar amps.

I have a few available. GBP 5.00 each plus shipping and paypal (similar ones can cost up to GBP 30.00 each).

8_15R_45W.jpg

*******************************************************************************************

Lot of transformer clamps in varying sizes. From ultra large to small. Used.

GBP 15.00 for the lot plus shipping and paypal. What you see in the picture is what you get (the whole lot will cost you almost GBP 100.00 when bought new).

3.JPG

*********************************************************************************************

Tube shields, new and unused. Four of them have the locking base missing.

GBP 5.00 for the lot plus shipping and paypal (they cost between GBP 2 and 2.50 each ).

4.JPG

*********************************************************************************************

Set of multi-pin blade power connectors. Used.

GBP 20.00 for the lot of three plus shipping and paypal. What you see in the picture is what you get.

6.jpg

*****************************************************************************************

DC power cable terminated with multi-pin blade connectors. 3 meters long.
I do not exactly remember where it came from but might have been a Tascam mixing console.

GBP 10.00 plus shipping and paypal.

7.JPG

*********************************************************************************************

Fuse board. Can handle up to 5A per fuse.
These were left over from the birth days of 51x racks and the power supplies.
The four molex header are for status LED connections.

I have a number of boards. GBP 4.00 each plus shipping and paypal.

Please note that the five fuse holders are included in the price.
However, the fuses, terminal blocks and molex headers are not included
Fuses are 20mm.
Terminal blocks are 5mm pitch and the molex are 2.54mm pitch.

fuseboard2.jpg

**************************************************************************************

Various meters.

Meters are all gone.
 
Last edited:
Back
Top