Great British Spring Reverb Clone

[RuudNL]

I remember that I modified my GBS: the reverb tanks were on top of each other, driver coil 1, recovery coil 1, driver coil 2 recovery coil 2.
I noticed that the magnetic field of driver coil 2 was picked up by recovery coil 1, because they were close together.
After I had reversed one reverb tank, this problem was solved.
By the way: it was very difficult to get the metal aluminium plate with the two reverb tanks out, because they were firmly wedged in the PVC pipe.

 

[thomasdf]

True ! It was very hard getting them out ... at some point I nearly gave up.
My two tanks are aligned one next to the other, and bolted to a an aluminium sheet, so they are not that close.
The whole design is silent, in my case.