nielsk
Well-known member
Trying to finish a project and I ran out of the CANIL Class A Driver (rev2) PCBs I had from long ago, and I have not been able to find someone who will make a few from the PDF I have of it, nor the time to re-create from scratch.
This is simply the output driver (everything past the fader pot) from a Neve BA283 / 183 card, on a small square PCB, so there may be other versions out there that would work.
If anyone out there has some they never used...
Thanks!
This is simply the output driver (everything past the fader pot) from a Neve BA283 / 183 card, on a small square PCB, so there may be other versions out there that would work.
If anyone out there has some they never used...
Thanks!