Hey everyone!
I'm new to this forum, but also new to building my own stuff. I have quite some experience in the theoretical part of audio engineering, and I'm a huge gear-freak, but my knowledge of how what i use is put together is basically zero at this point.
I decided to learn-by-doing as that works best for me, and as so, my first project would be the Gyraf SSL Clone.
I will be buying this kit from PCBGrinder;
https://pcbgrinder.com/index.php?route=product/product&path=60_74&product_id=50
My first and most basic question at this point is what more i need to have a fully finished compressor. I'm talking cases, meters, knobs, frontpanels etc. and possibly anything i may have missed. A shopping-list so i can get the buying part over with and start building, basically, without running into any shortages of anything.
Also interested in what you guys are using
I'm living in europe btw, if that makes any difference (online-shops etc)
Thanks in advance!
I'm new to this forum, but also new to building my own stuff. I have quite some experience in the theoretical part of audio engineering, and I'm a huge gear-freak, but my knowledge of how what i use is put together is basically zero at this point.
I decided to learn-by-doing as that works best for me, and as so, my first project would be the Gyraf SSL Clone.
I will be buying this kit from PCBGrinder;
https://pcbgrinder.com/index.php?route=product/product&path=60_74&product_id=50
My first and most basic question at this point is what more i need to have a fully finished compressor. I'm talking cases, meters, knobs, frontpanels etc. and possibly anything i may have missed. A shopping-list so i can get the buying part over with and start building, basically, without running into any shortages of anything.
Also interested in what you guys are using
I'm living in europe btw, if that makes any difference (online-shops etc)
Thanks in advance!