micah421
Active member
Hello Everyone! I just received (as a Christmas gift) a half built GSSL Type 4000 Compressor.
HERE IS WHAT I HAVE:
1. Case
2. VU
3. PCB (largest) some parts have been soldered in
4. PCB (GSSL SIDECHAIN HIGH PASS)
5. PCB (Ratio_Attack_Release) a few components have been soldered in
6. PCB Turbo (Expat Audio)
7. PCB CRC (Expat Audio)
So my guess is someone found it too challenging and just quite. I've been looking on the web to possibly find what parts I need but I'm a little overwhelmed with all the fragmented info. Also and quite comically every time I find someone who posted a parts list for Mouser or DigiKey, the link is dead. I guess its also important to understand I'm in the US.
I was wondering if you could help me with a build of materials from Mouser or DigiKey....or just anything to help me.
Thanks so much for any help
Micah
HERE IS WHAT I HAVE:
1. Case
2. VU
3. PCB (largest) some parts have been soldered in
4. PCB (GSSL SIDECHAIN HIGH PASS)
5. PCB (Ratio_Attack_Release) a few components have been soldered in
6. PCB Turbo (Expat Audio)
7. PCB CRC (Expat Audio)
So my guess is someone found it too challenging and just quite. I've been looking on the web to possibly find what parts I need but I'm a little overwhelmed with all the fragmented info. Also and quite comically every time I find someone who posted a parts list for Mouser or DigiKey, the link is dead. I guess its also important to understand I'm in the US.
I was wondering if you could help me with a build of materials from Mouser or DigiKey....or just anything to help me.
Thanks so much for any help
Micah