andre tchmil
Well-known member
Hi all.
Need to rack some preamps and I'm using the JLM go between kit for the project.
Preamps do have a phase switch on board, so I was thinking if I could use the existing JLM phase switch as an 150/600 ohm impedance switcher. Ideas very much welcome.
Need to rack some preamps and I'm using the JLM go between kit for the project.
Preamps do have a phase switch on board, so I was thinking if I could use the existing JLM phase switch as an 150/600 ohm impedance switcher. Ideas very much welcome.