Boards are looking great. Do you plan to release it as a DIY project or it's just for your personal build?Starting a new build
I'm sure people will like to have such a nice U67 boards. Especially if you can give DIY build support.I don't know if it works yet!
I could share some boards if there's interest from others.
I have 2 early versions of the NadyTCM 1050’s (no tube socket) earmarked for possible U67 conversion (IF I canI don't know if it works yet!
I could share some boards if there's interest from others.
Those are the screws that came with the transformer from Moby. I think they a stainless. I did a copper pour on the upper board, intending to ground the transformer core, but the copper pour was not exposed(but it could be scraped to ground the screws/core). It looks like original u67s had this. I'm curious what Moby or others would recommend.will ferrous screws effect response of transformer?
looks good!
will ferrous screws effect response of transformer? No, Screws does not affect magnetics properties, no worries
Again, no worries. I use same material as the genuine one.Those are the screws that came with the transformer from Moby. I think they a stainless. I did a copper pour on the upper board, intending to ground the transformer core, but the copper pour was not exposed(but it could be scraped to ground the screws/core). It looks like original u67s had this. I'm curious what Moby or others would recommend.
Enter your email address to join: