How to make a volume control to the effects return on my amp out of a guitar pedal

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Scott1968

New member
Joined
Feb 3, 2025
Messages
1
Location
Ohio USA
Hello. I'm wanting to run out of my rockman x100 into effects loop return. I need a separate volume control so I can set rockman pedal volume at about 3/4 and control volume out of pedal to effects loop. Is this possible? I Have spare potentiometers laying around. Thanks for any help.
 
into effects loop return

Effects loop return of what? Assuming that the effects loop input is high impedance it could be as simple as wiring the input signal to the top of the pot, and sending the wiper into the effects loop input.

1738638474151.png
 

Latest posts

Back
Top