Meter drawing software??
- Thread starter FotisGR
- Start date
Help Support GroupDIY Audio Forum:
Hey, thank you very much for answer, but isnt that i need. Because my english are not so good .....
So i explain : i need a software to design- draw and then print the inside of panel meters. For example i need to convert a vintage 0-100mA meter to radio frequency power meter. I need a software to print custom labels inside of meters...
thank you
So i explain : i need a software to design- draw and then print the inside of panel meters. For example i need to convert a vintage 0-100mA meter to radio frequency power meter. I need a software to print custom labels inside of meters...
thank you
Harpo
Well-known member
Hi Fotis,
don't know for what platform. (PC/Mac).
Maybe GIMP for Linux/Win2000/XP/Vista. I think for at least Linux is a greece version availiable.
Most graphic/photo-editing software will do it.
don't know for what platform. (PC/Mac).
Maybe GIMP for Linux/Win2000/XP/Vista. I think for at least Linux is a greece version availiable.
Most graphic/photo-editing software will do it.
dunno if there´s an app specially for meter scales.
I use illustratar for that task.
1st I take closeup shot from the open meter with the digicam, put that on a separate layer in illustrator (scaled to the right size). then I put some guides in there for the snappoints.
now redrawing the skale is easy like 1,2,3. print, glue to flipside of the original scale (because the original scale might shine thru the new one if you use the same side)...done...
the tuff part usually is to squeeze some leds for illumination into it :green:
before/after :wink:
I use illustratar for that task.
1st I take closeup shot from the open meter with the digicam, put that on a separate layer in illustrator (scaled to the right size). then I put some guides in there for the snappoints.
now redrawing the skale is easy like 1,2,3. print, glue to flipside of the original scale (because the original scale might shine thru the new one if you use the same side)...done...
the tuff part usually is to squeeze some leds for illumination into it :green:
before/after :wink:
Always pays to check the meta:
[quote author="clintrubber"]Make new meter scales:
http://www.realhamradio.com/Meter.htm
http://www.tonnesoftware.com/meter.html[/quote]
[quote author="clintrubber"]Make new meter scales:
http://www.realhamradio.com/Meter.htm
http://www.tonnesoftware.com/meter.html[/quote]
![Electronics Soldering Iron Kit, [Upgraded] Soldering Iron 110V 90W LCD Digital Portable Soldering Kit 180-480℃(356-896℉), Welding Tool with ON/OFF Switch, Auto-sleep, Thermostatic Design](https://m.media-amazon.com/images/I/41gRDnlyfJS._SL500_.jpg)
