I am trying to find a 5.6R to 6R resistor with 1% tolerance. I found 5% Koa's. Maybe I am slipping into obsessive audiophilio land.
i'm making an attenuator where the low setting of -41 is on the bottom and by the time it gets to the top of the 4 pole ladder that 5% is much less when you get to 237R, which is my least amount of attenuation R value on one side of a balanced T.
I hope this makes sense, I've been climbing ladders and crassing Tee's all eve.
BTW anyone use these folks:
http://www.precisionresistor.com/index.htm
I think they are the same as halco or some offshoot
i'm making an attenuator where the low setting of -41 is on the bottom and by the time it gets to the top of the 4 pole ladder that 5% is much less when you get to 237R, which is my least amount of attenuation R value on one side of a balanced T.
I hope this makes sense, I've been climbing ladders and crassing Tee's all eve.
BTW anyone use these folks:
http://www.precisionresistor.com/index.htm
I think they are the same as halco or some offshoot