maxheadroom
Well-known member
Hi all,
this week i finished my GSSL with supersidechain filter and hardbypass with relais.
here are pics:
http://gasman.lima-city.de/diy/ssl/ssl1.JPG
http://gasman.lima-city.de/diy/ssl/ssl2.JPG
http://gasman.lima-city.de/diy/ssl/ssl3.JPG
http://gasman.lima-city.de/diy/ssl/ssl4.JPG
on the inside pics, the unit was not totally finished, it's without the ssc-board.
the prints are home-etched, the frontpanel with laser engraved (was cheaper as drill-engraving)
for calibrating i used trims for unity gain, meter and ratio.
i measured the input vs. output working.
see here the tables with bypass, 2:1 , 4:1 and 10:1 ratio
the scales are in dB
i'm little confused about the working of threshold and ratio.
on ratio 10:1 and threshold at 0, its correct.
is this normal?
i forget to thanks the nice peoples who helped me in this projekt!
big thanks to frank, HPL, jakob, harpo and all the guys who i forgot.
this week i finished my GSSL with supersidechain filter and hardbypass with relais.
here are pics:
http://gasman.lima-city.de/diy/ssl/ssl1.JPG
http://gasman.lima-city.de/diy/ssl/ssl2.JPG
http://gasman.lima-city.de/diy/ssl/ssl3.JPG
http://gasman.lima-city.de/diy/ssl/ssl4.JPG
on the inside pics, the unit was not totally finished, it's without the ssc-board.
the prints are home-etched, the frontpanel with laser engraved (was cheaper as drill-engraving)
for calibrating i used trims for unity gain, meter and ratio.
i measured the input vs. output working.
see here the tables with bypass, 2:1 , 4:1 and 10:1 ratio
the scales are in dB
i'm little confused about the working of threshold and ratio.
on ratio 10:1 and threshold at 0, its correct.
is this normal?
i forget to thanks the nice peoples who helped me in this projekt!
big thanks to frank, HPL, jakob, harpo and all the guys who i forgot.