Holger

My first API 500 module ;-) (Passive Signal Splitter) New
« on: May 07, 2010, 02:08:30 PM »
Fully API 500/51X compatible passive signal splitter based on a Sowter 4679 transformer.
Has XLR and Lemo outputs. Frontpanel is from Frank/NRGrecording.
I'm claiming here to be the first guy who has built an API module with a PSU current consumption of 0 mA :)







jsteiger

Re: My first API 500 module ;-) (Passive Signal Splitter)
« Reply #1 on: May 07, 2010, 03:10:53 PM »
Fully API 500/51X compatible passive signal splitter based on a Sowter 4679 transformer.
Has XLR and Lemo outputs. Frontpanel is from Frank/NRGrecording.
Very cool Holger!  8) 8)

Quote
I'm claiming here to be the first guy who has buillt an API module with a PSU current consumption of 0 mA :)
I think you are right. For this, you must get a prize!  ;D  Will for sure help to balance out some overly hungry modules.

Best, Jeff
Visit the CAPI store at http://www.capi-gear.com

CAPI is not affiliated with, endorsed by, or sponsored by API.

nrgrecording

Re: My first API 500 module ;-) (Passive Signal Splitter)
« Reply #2 on: May 07, 2010, 03:53:21 PM »
 8) :P
Frank Röllen. www.energyrecording.de [FORUM · DIY WEBSITE · STUDIO]°°°° www.frontpanels.de [Engraved Frontpanels]°°°°

nickeveslage

Re: My first API 500 module ;-) (Passive Signal Splitter)
« Reply #3 on: May 07, 2010, 04:21:28 PM »
Nice!

Revolutionary! ha

strangeandbouncy

Re: My first API 500 module ;-) (Passive Signal Splitter)
« Reply #4 on: May 07, 2010, 04:59:06 PM »
Excellent!


   but where did you get that rear connector-strip thingy?



   Kindest regards,


     ANdyP
. . . . RUH ROH . . . . .


strangeandbouncy

Re: My first API 500 module ;-) (Passive Signal Splitter)
« Reply #6 on: May 07, 2010, 05:04:57 PM »
Holger,



  thanks for the education!


   kindest regards,


     ANdyP
. . . . RUH ROH . . . . .

Denyle Guitars

Re: My first API 500 module ;-) (Passive Signal Splitter)
« Reply #7 on: May 07, 2010, 06:46:08 PM »

I'm claiming here to be the first guy who has built an API module with a PSU current consumption of 0 mA :)


I once stuck a fader into a blank lunchbox panel to use as an attenuator. That was probably 2 years ago. It was by no means as pretty as your splitter though.  ;D

okgb

Re: My first API 500 module ;-) (Passive Signal Splitter)
« Reply #8 on: May 07, 2010, 06:50:15 PM »

 I have a blank panel that i didn't do anything on
waaay more than passive [ inactive  ! ]
GKB Audio / Greg Boboski

wowi

Re: My first API 500 module ;-) (Passive Signal Splitter)
« Reply #9 on: May 08, 2010, 05:30:51 AM »
Very impressive.  :)

Looking to your output on DIY project comes a question to my mind:

Don't you need any sleep ?  ;D

Wolfgang


[silent:arts]

Re: My first API 500 module ;-) (Passive Signal Splitter)
« Reply #10 on: May 08, 2010, 05:34:48 AM »
strangeandbouncy,
Jeff as well as Silentarts/Volker have them in stock
http://classicapi.com/catalog/product_info.php?cPath=87_88&products_id=164
since you are in the UK, Cemal (Sahib) stocks them too ;)

nice work Holger, but I have to re-check the power specs ...
0mA will work in the GroupDIY 51X Rack, but I have heard there are PSU problems in some other Alliance products ;D


 

Related Topics

  Subject / Started by Replies Last post
7 Replies
6133 Views
Last post August 08, 2007, 04:07:05 PM
by Gus
0 Replies
1081 Views
Last post July 08, 2008, 05:57:02 PM
by JW
459 Replies
115415 Views
Last post May 16, 2017, 02:33:46 AM
by Blackdawg
7 Replies
2619 Views
Last post December 13, 2013, 09:27:14 AM
by AndreasS