TASCAM Cards are still available, some folks have not taken their allotted cards, so until they are gone they are available.
$7 each will cover the cost for the TASCAM cards.
If you are in the USA, $7.50 per card covers postage.
Postage is whatever actual postage is.
I will leave this open for 30 days or so.
Send your address, screen name, how many TASCAM Cards, and paypal payment to bxb at odellventures dot com
Interested posters:
Remember - 1 card = 8 channels in and out, 2 cards = 11 channels in and out
bruce0 - 3 cards
bruno2000 - 1 card (depending upon price)
cbarrett92 - 2 cards
delaymix - 4 cards
kramerb1 - 4 cards
piano - 1 card
Winetree - 8 cards (depending on price)
NoBass - 2 cards
kvothe - 4 to 8 cards
jandoste - 1 card
jordanazor - 4 cards
The story
Silent Arts lovely GDIY511 in early planning had D-Subminature 25 pin Tascam Format connectors. Somehow these never appeared in the rack. So I made these up for my own use.
Cards mount using the D-Sub screws (hex jacks) to attach to panel. Card floats between backplane and back panel.
DSUB Cutouts take some time with drill press and Dremel. Cutting template in PDF is in the thread. There are two, the second is a better choice but both work.
Here is the Back panel cutting template:
http://groupdiy.com/index.php?action=dlattach;topic=47653.0;attach=24380
Here are Build instructions, somewhat daunting because there are so many different configurations and each requires a different cable length:
BUILD INSTRUCTIONS
Build Instructions, many different configurations and each requires a different cable length:
Full TASCAM instruction Medium Resolution 13MB.pdf
$7 each will cover the cost for the TASCAM cards.
If you are in the USA, $7.50 per card covers postage.
Postage is whatever actual postage is.
I will leave this open for 30 days or so.
Send your address, screen name, how many TASCAM Cards, and paypal payment to bxb at odellventures dot com
Interested posters:
Remember - 1 card = 8 channels in and out, 2 cards = 11 channels in and out
bruce0 - 3 cards
bruno2000 - 1 card (depending upon price)
cbarrett92 - 2 cards
delaymix - 4 cards
kramerb1 - 4 cards
piano - 1 card
Winetree - 8 cards (depending on price)
NoBass - 2 cards
kvothe - 4 to 8 cards
jandoste - 1 card
jordanazor - 4 cards
The story
Silent Arts lovely GDIY511 in early planning had D-Subminature 25 pin Tascam Format connectors. Somehow these never appeared in the rack. So I made these up for my own use.
Cards mount using the D-Sub screws (hex jacks) to attach to panel. Card floats between backplane and back panel.
DSUB Cutouts take some time with drill press and Dremel. Cutting template in PDF is in the thread. There are two, the second is a better choice but both work.
Here is the Back panel cutting template:
http://groupdiy.com/index.php?action=dlattach;topic=47653.0;attach=24380
Here are Build instructions, somewhat daunting because there are so many different configurations and each requires a different cable length:
BUILD INSTRUCTIONS
Build Instructions, many different configurations and each requires a different cable length:
Full TASCAM instruction Medium Resolution 13MB.pdf