duantro

I should clarify, I only have the red stereo output boards, not the filter boards, etc. I bought the Sontec pcbs and added the M/s boards, so didn't use the stereo output boards. I guess with some ingenuity you could maybe bread board the filters? see photo.
Also here are the stereo docs- http://twin-x.com/groupdiy/displayimage.php?album=399&pos=5
Docs link at first post is working for the m/s boards also

Edit: I don't have scematics for the m/s boards as it looks like Igor only supplied parts placement docs. Apologies for any false hope!
« Last Edit: September 03, 2014, 12:46:57 PM by duantro »


weiss

Re: Sontec: hardware bypass, balanced THAT I/O, MS, power supply - at one PCB!
« Reply #141 on: September 25, 2015, 06:46:57 PM »
does someone still have an unused MS board laying around? would i need the red pcb's to finish a sontec?
thanks

druu

Re: Sontec: hardware bypass, balanced THAT I/O, MS, power supply - at one PCB!
« Reply #142 on: September 25, 2015, 08:25:50 PM »
If you have the long filters boards then you would only need the red PCB's pictured above (plus PSU of course) to finish a build. It wouldn't have MS/Hardware bypass though.

duantro

Re: Sontec: hardware bypass, balanced THAT I/O, MS, power supply - at one PCB!
« Reply #143 on: September 25, 2015, 08:50:32 PM »
Yes, and maybe incorporate something with these m/s boards?
http://www.ka-electronics.com/kaelectronics/MS_Matrix/MS_Matrix.htm

shabtek

Re: Sontec: hardware bypass, balanced THAT I/O, MS, power supply - at one PCB!
« Reply #144 on: September 25, 2015, 11:29:14 PM »
hardware bypass?    what is wrong with a switch?
"really fine players do not use stomp boxes or master volume, they match the amp to the room and turn it up to 11.  Stevie Ray, BB King, Albert King, Duane Allman, Dicky Betts, Louis Armstrong"
   -CJ

duantro

Re: Sontec: hardware bypass, balanced THAT I/O, MS, power supply - at one PCB!
« Reply #145 on: September 26, 2015, 12:10:06 AM »
I'm not positive, but I think Weiss is looking for mid side functionality in the sontec

weiss

I'm not positive, but I think Weiss is looking for mid side functionality in the sontec

exactly duantro, do you still have the red boards?
if so, i would also buy your pcb set shabtek ;)

duantro

I'm not positive, but I think Weiss is looking for mid side functionality in the sontec

exactly duantro, do you still have the red boards?
if so, i would also buy your pcb set shabtek ;)

yes, I still have the red boards.

Trench Recordings

Anyone know what value resistors I need for positions RREL to  RREL5. Says "tbd" on silkscreen for the Sontec_MS Board v1.1. They are right beside the relays so I assume the value depends on the relay installed?
« Last Edit: May 19, 2018, 09:19:19 PM by Trench Recordings »

druu

Anyone know what value resistors I need for positions RREL to  RREL5. Says "tbd" on silkscreen for the Sontec_MS Board v1.1. They are right beside the relays so I assume the value depends on the relay installed?

The BOM i have says Jumper or 10R.


Trench Recordings

wow you have a BOM from Igor? can you email me it  or post it in here ? :)
[email protected]

Thanks for the info

Scanned my pcb boards if anyone is interested

https://www.dropbox.com/sh/d1r0rdug5iczgb5/AACHhU01cw2lKP4AkPOBCjNka?dl=0

« Last Edit: May 20, 2018, 06:13:57 PM by Trench Recordings »

SKJGProject

somebody has one of these boards for sale? i want to upgrade my sontec
I used to date a blind girl. Her name was ::… ..:.: .:::. .::.. ….: .:.::


 

Related Topics

  Subject / Started by Replies Last post
4 Replies
3348 Views
Last post March 21, 2009, 10:42:00 PM
by SSLtech
2 Replies
1914 Views
Last post November 03, 2011, 05:37:57 AM
by radiance
4 Replies
2501 Views
Last post December 09, 2012, 09:19:15 PM
by Igor
1 Replies
314 Views
Last post June 29, 2020, 05:47:47 PM
by ruffrecords