jensenmann

Time and space tells me to sell this restoration project, since it´s sitting in the corner for years and I cannot see any progress in the near future. What it is:
I bought three Dynacord Echocord mini tape delays off ebay to have enough parts for making a working one out of them. The first one is recapped, a few transistors are changed, static voltages are all ok and the transport is working. I narrowed it´s problem down to either the head or a coil in the head-driver circuit. I didn´t check the other delays or maybe I did and forgot about their state. Chances are high that the first one can be brought back to life quite easily by using the parts of one of the others. Even better is that there´s a guy around (ex Dynacord tech) who still rewinds the heads: http://bobbysreparaturen.de in case that´s the problem.
100€ and the lot is yours.
cheers
Jens
Quote from: PRR
The tubes of course don't care what frequency they distort


Whoops

Re: FS: 3x Dynacord Echocord Mini tape delay restoration project
« Reply #1 on: August 24, 2018, 01:19:08 PM »
Hi,
I have one of those units to restore, let me see what I need.

Thanks

jensenmann

Re: FS: 3x Dynacord Echocord Mini tape delay restoration project
« Reply #2 on: September 06, 2018, 08:53:08 AM »
bump
Jens
Quote from: PRR
The tubes of course don't care what frequency they distort

jensenmann

Re: FS: 3x Dynacord Echocord Mini tape delay restoration project
« Reply #3 on: September 21, 2018, 11:14:55 AM »
Last bump before dumpster
Jens
Quote from: PRR
The tubes of course don't care what frequency they distort

Re: FS: 3x Dynacord Echocord Mini tape delay restoration project
« Reply #4 on: December 09, 2019, 04:01:34 AM »
Last bump before dumpster

Pm for parts or the location where the dumpster is... :o

jensenmann

Re: FS: 3x Dynacord Echocord Mini tape delay restoration project
« Reply #5 on: December 09, 2019, 07:16:28 AM »
They are all gone to a member for repair.
Jens
Quote from: PRR
The tubes of course don't care what frequency they distort

Re: FS: 3x Dynacord Echocord Mini tape delay restoration project
« Reply #6 on: December 09, 2019, 08:32:43 AM »
They are all gone to a member for repair.

Ok, thanks. It is so cold without clothing!

Help, Mini needs body kit and knobs!
« Last Edit: December 09, 2019, 08:37:11 AM by rock soderstrom »

Whoops

Re: FS: 3x Dynacord Echocord Mini tape delay restoration project
« Reply #7 on: December 09, 2019, 11:43:20 PM »
Try to get the clothes from the member that acquired the units. I'm sure he have some spare dresses

Re: FS: 3x Dynacord Echocord Mini tape delay restoration project New
« Reply #8 on: December 10, 2019, 02:27:57 AM »
Try to get the clothes from the member that acquired the units. I'm sure he have some spare dresses

True, 👍 I had the same idea.

I do not know, who is the new owner now, but if you read that, I need some (not all) plastic body parts, knobs and one pulley. A better faceplate would be good, too. Cash or lets trade something you  want. (e.g. tubes or transformers)

Cheers
« Last Edit: December 12, 2019, 09:54:11 AM by rock soderstrom »

Whoops

Re: FS: 3x Dynacord Echocord Mini tape delay restoration project
« Reply #9 on: December 11, 2019, 09:59:37 PM »
I do not know, who is this new owner now

ask jensenmann


 

Related Topics

  Subject / Started by Replies Last post
14 Replies
8838 Views
Last post April 25, 2017, 06:47:56 AM
by thomasdf
3 Replies
4965 Views
Last post January 05, 2006, 12:05:07 PM
by clintrubber
3 Replies
5035 Views
Last post November 28, 2008, 05:06:13 PM
by craptical
2 Replies
1702 Views
Last post May 24, 2010, 10:03:56 PM
by thejoerusso