Falk

Altec 436 / RS124-ish Clone
« on: November 20, 2019, 02:59:42 AM »
Good Morning,

I am planing a Vari Mu build which is as close as possible to the named compressors and currently I am designing a front panel.
What would you guys go for? Any feedback is highly appreciated.

Link to three designs:
https://www.dropbox.com/s/dfyqlgxxuoudykc/Design_3colours_Zeichenfl%C3%A4che%201.jpg?dl=0

Thank you!
Falk


weiss

Re: Altec 436 / RS124-ish Clone
« Reply #1 on: November 20, 2019, 09:18:16 AM »
Like the design. I'm also building two clones at the moment.
I would go for the black one. Will you use brushed metal? or powdercoating?

kCal

Re: Altec 436 / RS124-ish Clone
« Reply #2 on: November 26, 2019, 05:46:14 AM »
Definitely green!

Winetree

Re: Altec 436 / RS124-ish Clone
« Reply #3 on: November 26, 2019, 11:31:46 AM »
Green is Altec.

Falk

Re: Altec 436 / RS124-ish Clone
« Reply #4 on: January 09, 2020, 06:56:41 AM »
This is how it got in the end.

ruffrecords

Re: Altec 436 / RS124-ish Clone
« Reply #5 on: January 09, 2020, 09:47:30 AM »
I would be wary about including company logos, especially EMI. They are known to be litigious.

Cheers

Ian
www.customtubeconsoles.com
https://mark3vtm.blogspot.co.uk/
www.eztubemixer.blogspot.co.uk


'The only people not making mistakes are the people doing nothing'

RuudNL

Re: Altec 436 / RS124-ish Clone
« Reply #6 on: January 09, 2020, 10:22:25 AM »
Nice, but I would omit the  'EMI' and 'Altec', because they aren't...
There is a solution for every problem!

http://www.vansteenisaudio.nl

Rob Flinn

Re: Altec 436 / RS124-ish Clone
« Reply #7 on: January 09, 2020, 11:59:46 AM »
Green is Altec.

Maybe but RS124 are cream.
regards Rob

weiss

Re: Altec 436 / RS124-ish Clone
« Reply #8 on: January 09, 2020, 06:13:23 PM »
This is how it got in the end.
nice, i like the design!

Re: Altec 436 / RS124-ish Clone
« Reply #9 on: July 05, 2020, 05:58:24 AM »
This is how it got in the end.

Nice design Falk.
May I ask you which schematics did you use?

Giovanni


Falk

Re: Altec 436 / RS124-ish Clone
« Reply #10 on: July 05, 2020, 06:25:11 PM »
I used the one attached but would recommend to read the threads about the altec 436 and emi rs 124 in the forum. There are a couple of them providing all the information needed.

Best regards,
Falk


Re: Altec 436 / RS124-ish Clone
« Reply #11 on: July 06, 2020, 11:43:42 AM »
I used the one attached but would recommend to read the threads about the altec 436 and emi rs 124 in the forum. There are a couple of them providing all the information needed.

Best regards,
Falk

Thank you very much!

Giovanni


 

Related Topics

  Subject / Started by Replies Last post
50 Replies
23302 Views
Last post October 11, 2010, 12:12:36 PM
by EmRR
7 Replies
5201 Views
Last post October 08, 2010, 09:55:23 PM
by gary o
7 Replies
2810 Views
Last post February 18, 2013, 10:55:57 AM
by xfmr
20 Replies
1057 Views
Last post April 29, 2020, 08:11:20 PM
by EmRR