Sammas

META - SSL 9K Preamp
« on: July 19, 2005, 12:10:59 AM »
This is a meta-thread, made to allow you to keep track of the posts concerning this single issue - I will continue re-editing this first post.

- All should be contained in this first post - which is re-edited regularily.

- Everyone is welcome to reply with comments and pointers to things they consider relevant. This will be copy/pasted into the first post.

- On a regular basis, we delete all posts but the first, and bumps it to the top.




Forum Links

http://www.groupdiy.com/index.php?topic=4312&postdays=0&postorder=asc&highlight=ssl&start=0
9K PSU transformer question/problem - By Rob Flinn. Great PSU infomation about obtaining 18v & 15v required to run the SSL 9k preamp

http://www.groupdiy.com/index.php?topic=1519&highlight=mat04
MAT-02/Mat-04 Source Discussion and Comparison - Started by jeroddumas

http://www.groupdiy.com/index.php?topic=8415&highlight=ssl
How Does it Sound? - Svart's reply about why the 9K is a nice little project.

http://www.groupdiy.com/index.php?topic=3950&highlight=ssl9k
Completed 9K Boards and Parts Infomation - By Neeno, It includes infomation on cap's and heatsinking.

http://www.groupdiy.com/index.php?topic=7725&highlight=ssl
SSL 9000 Design Background - By uk03878. It contains some nice background infomation about the SSL 9000 series with an external link to comments straight from the designer Andy Millar.

http://www.groupdiy.com/index.php?topic=4731&highlight=ssl
Gain switch for 9k mic pre????? - By jeroddumas. Wiring Diagram and Resistor Values for the SSL 9K gain switch thanks to PRR

http://www.groupdiy.com/index.php?topic=4388&highlight=ssl
Cap Question for SSL 9k - By jeroddumas, contains infomation on alternative parts and there sources.

http://www.groupdiy.com/index.php?topic=5345&highlight=ssl
SSL 9K DC Coupling Comparison - By Volta, Outlining the possible differences between Keith's DIY design and the real thing in regards to DC coupling/servo based design.

http://www.groupdiy.com/index.php?topic=4982&highlight=ssl
9K Power Transformer Question - By jeroddumas, regarding an appropriate transformer for the job.

http://www.groupdiy.com/index.php?topic=5733&highlight=ssl
Another SSL 9K nearing completion - This time the work is by jeroddumas

http://www.groupdiy.com/index.php?topic=5350&highlight=ssl
Troubleshooting background hiss in the 9K - Possible remedies for Neeno's noise problem

http://www.groupdiy.com/index.php?topic=233&highlight=ssl
Gustav's DIY PCB's for sale - Great quality work, each set includes SSL mainboard, one psu board and one balancing board

External Links

http://www.beatbazar.com/guests/ssltech/
The DIY SSL 9k Homepage from its creator Keith (Aka SSLtech)

http://www.studio21.ch/diy/neeno/ssl9k/DIY_9k_Preamp.pdf
Parts List, Layout and Schematic for the 9K project - Provided by Neeno, includes the required infomation for the PSU and Balancing card.

http://www.studio21.ch/diy/neeno/ssl9k/ssl9k_test.htm
SSL9K comparison - Thanks to Neeno.


I couldn't find one so i made one... hope you guys don't mind!
« Last Edit: November 16, 2011, 05:25:36 PM by Ethan »


gyraf

META - SSL 9K Preamp
« Reply #1 on: July 19, 2005, 01:37:19 AM »
Well done, Sammas!

 :thumb:

..added to Meta-meta..

Jakob E.
..note to self: don't let Harman run your company..

META - SSL 9K Preamp
« Reply #2 on: November 18, 2005, 07:38:36 AM »
The first link does not exists ...

"Gustav's DIY PCB's for sale" was updated to http://www.groupdiy.com/index.php?topic=10776

JayDee

META - SSL 9K Preamp
« Reply #3 on: November 20, 2005, 01:13:07 PM »
the first link is still wrong :

The topic or post you requested does not exist

Siegfried Meier

META - SSL 9K Preamp
« Reply #4 on: March 29, 2006, 08:09:27 PM »
Unfortunately, the most important post is still gone.  Does anyone know what's happened to it??

Siegfried

sonicwarrior

Re: META - SSL 9K Preamp
« Reply #5 on: February 08, 2007, 06:08:41 AM »
Quote from: "Sammas"

http://www.groupdiy.com/index.php?topic=233&highlight=ssl
Gustav's DIY PCB's for sale - Great quality work, each set includes SSL mainboard, one psu board and one balancing board


Thread is gone.

I think it's replaced by this one here:
http://www.groupdiy.com/index.php?topic=10776

okgb

META - SSL 9K Preamp
« Reply #6 on: October 21, 2007, 10:11:38 AM »
With Gustav's 9K pcb sale this may be a good time to update
some links [ i notice some like boms & lists are dead , not to
mention pix as well ]

 Anyone ? tia regards Greg
GKB Audio / Greg Boboski

Whoops

Re: META - SSL 9K Preamp
« Reply #7 on: December 24, 2008, 10:23:01 PM »
Definitely,
I think it's time also to release and updated BOM and Parts list.

Neeno did a great job at the beginning with his Document.
but there's some mistakes and missing components that could be already documented.
navigating through the forum, you see the same questions coming over and over again.

I'm doing a new BOM, and would like to release an update to the Neeno document, if he's fine with it.


phatmateo

Re: META - SSL 9K Preamp
« Reply #8 on: January 29, 2009, 12:22:23 PM »
I just ordered a SSL 9K PCB from Gustav so that would be great if you did an updated bom :)

rooster21

Re: META - SSL 9K Preamp
« Reply #9 on: May 18, 2010, 09:24:12 PM »
I agree, Updated BOM, if anything pm it to me.


mrc

Re: META - SSL 9K Preamp
« Reply #10 on: May 18, 2010, 10:32:03 PM »
Are the Mat 12's going to be compatible, and will they require any changes if they are?  Any firm word on the availability date?  I have 4 I'd like to build, as well.

thebigskinny

    Collingwood, Ontario, Canada
  • Posts: 93
Re: META - SSL 9K Preamp
« Reply #11 on: December 06, 2010, 12:02:27 AM »
Any updated bom for this?

Re: META - SSL 9K Preamp
« Reply #12 on: January 21, 2011, 03:31:05 AM »
Updated BOM Anyone????

bruno2000

Re: META - SSL 9K Preamp
« Reply #13 on: January 21, 2011, 09:52:47 AM »
Gustav has these boards as well.

http://www.groupdiy.com/index.php?topic=42552.0

Best,
Bruno2000

G-Sun

Re: META - SSL 9K Preamp
« Reply #14 on: January 02, 2012, 05:39:10 AM »
Reformated/updated BOM with Farnell++ parts list
http://www.groupdiy.com/index.php?topic=47123.0
HJFP2, ssl9k, Harrison Ford Filters
My music


 

Related Topics

  Subject / Started by Replies Last post
0 Replies
82908 Views
Last post June 05, 2004, 08:17:34 AM
by gyraf
23 Replies
5970 Views
Last post June 16, 2004, 11:34:36 PM
by Mbira
18 Replies
4936 Views
Last post July 01, 2004, 06:35:12 PM
by Rob Flinn
Meta Meta!

Started by fum The Lab

4 Replies
2591 Views
Last post July 26, 2004, 09:14:25 AM
by tubejay