lagoausente
Well-known member
Hello everybody.
I have built in a 2U rack some time ago 4 channels , but along this time have bought other preamps so now I´m plenty of them and prefer to get rid off a pair of units to get cash to buy high quality sdc mics so I need cash.
- Two supergreen channels (9098, double balanced version of the green). (diferent opamps options)
-Two Ina217 based preamp (dav clone), now has the That 1510.
It now has an external Soundcraft CPS PSU thats plug and play with a 4 pin XLR to the rack. It´s adjusted to +-15V and it could be used to supply many other preamps if you have other proyects because it´s 100VA of power.
The rack with the diy preamps also has a board with a cmoy headphone amp, and a DI guitar input that a guy on this forum helped with the schem draw.
My DIY rack is not labeled,
Forgot to mention, the supergreen has 24 position gain switch, 1.5 gain steps. The Ina/That preamp has a reverse logaritmic new plastic 5k pot plus a switch that act as pad for both channels,
Presonus M80 have stock Jensen transformers. Maybe you know the unit is based on the dual servo from JH. I upgraded the opamps to the modern FET ADA4627, suggested by Jim Williams, very precise and balanced on this preamp, it extends the hi end definition very well compared to the stock NE 5532 ones, it´s soic but the job of adapt it to dip is done as you seen in the pics, you can pull out them and try other if you like, but the ADA4627 are really good.
I made a shootout so you can compare them all to stock Apollo preamps: https://drive.google.com/open?id=0B50Y_uAYlQ6AT1FYeTBtZ1VoYU0
Also have AD24QS and DA24QS from Uwe Beis, mounted and working that I should sale aswell. My initial idea was to put it on the rack with the preamps but finally haven´t time for it so they are unused.
I´m trying to get cash for mics, so I´m open to reasonable offers. My email: [email protected]
I have built in a 2U rack some time ago 4 channels , but along this time have bought other preamps so now I´m plenty of them and prefer to get rid off a pair of units to get cash to buy high quality sdc mics so I need cash.
- Two supergreen channels (9098, double balanced version of the green). (diferent opamps options)
-Two Ina217 based preamp (dav clone), now has the That 1510.
It now has an external Soundcraft CPS PSU thats plug and play with a 4 pin XLR to the rack. It´s adjusted to +-15V and it could be used to supply many other preamps if you have other proyects because it´s 100VA of power.
The rack with the diy preamps also has a board with a cmoy headphone amp, and a DI guitar input that a guy on this forum helped with the schem draw.
My DIY rack is not labeled,
Forgot to mention, the supergreen has 24 position gain switch, 1.5 gain steps. The Ina/That preamp has a reverse logaritmic new plastic 5k pot plus a switch that act as pad for both channels,
Presonus M80 have stock Jensen transformers. Maybe you know the unit is based on the dual servo from JH. I upgraded the opamps to the modern FET ADA4627, suggested by Jim Williams, very precise and balanced on this preamp, it extends the hi end definition very well compared to the stock NE 5532 ones, it´s soic but the job of adapt it to dip is done as you seen in the pics, you can pull out them and try other if you like, but the ADA4627 are really good.
I made a shootout so you can compare them all to stock Apollo preamps: https://drive.google.com/open?id=0B50Y_uAYlQ6AT1FYeTBtZ1VoYU0
Also have AD24QS and DA24QS from Uwe Beis, mounted and working that I should sale aswell. My initial idea was to put it on the rack with the preamps but finally haven´t time for it so they are unused.
I´m trying to get cash for mics, so I´m open to reasonable offers. My email: [email protected]