I recently acquired a very nice Morley PFL (Pro Flanger)
I believe that the problems it has may actually be caused by it being misadjusted.
Like most vintage flangers there are a host of pots on the board.
High limit & Low limit for the foot control, SAD1024 bias for both channels, plus the Sweep LED circuit.
The ADA Flanger calibration instructions, which are close, are just different enough to not really work.
Wondered if anyone had the proper steps for the Morley
Thanks Michael
I believe that the problems it has may actually be caused by it being misadjusted.
Like most vintage flangers there are a host of pots on the board.
High limit & Low limit for the foot control, SAD1024 bias for both channels, plus the Sweep LED circuit.
The ADA Flanger calibration instructions, which are close, are just different enough to not really work.
Wondered if anyone had the proper steps for the Morley
Thanks Michael
