TillM
Well-known member
hey guys,
I finished my LVL Lok from @mihi_fuchs. Everything went smooth cause all is well documented and the pcb has also awesome quality.
But I've a problem with my unit.
In Bypass it passed audio, but as soon as I engage the unit I get a high frequency noise. I also cut the pads J1 and J2, but the problem is still there.
I made a audio demo, please lower the volume.
Also my input handle strange, when I turn it up the high frequency gets lower.
I checked the whole unit and don't find any faults so far.
Maybe someone has an idea.
https://www.dropbox.com/scl/fi/43qo...ey=78jwx00pndts8acisz5fm97if&st=csy0i9ku&dl=0
I finished my LVL Lok from @mihi_fuchs. Everything went smooth cause all is well documented and the pcb has also awesome quality.
But I've a problem with my unit.
In Bypass it passed audio, but as soon as I engage the unit I get a high frequency noise. I also cut the pads J1 and J2, but the problem is still there.
I made a audio demo, please lower the volume.
Also my input handle strange, when I turn it up the high frequency gets lower.
I checked the whole unit and don't find any faults so far.
Maybe someone has an idea.
https://www.dropbox.com/scl/fi/43qo...ey=78jwx00pndts8acisz5fm97if&st=csy0i9ku&dl=0
