Good morning all
a question about the 6.3V DC heaters
on the attached diagram I use a configuration from this forum.
I can not decipher and therefore calculate the output voltage.
_using HT center tap as ground
_and creating a virtual ground via the two 470 Ohm resistors
can you explain to me how this circuit works?
thank you
BOB
a question about the 6.3V DC heaters
on the attached diagram I use a configuration from this forum.
I can not decipher and therefore calculate the output voltage.
_using HT center tap as ground
_and creating a virtual ground via the two 470 Ohm resistors
can you explain to me how this circuit works?
thank you
BOB