I've about 25 wall-warts powering various audio effects...7.5vdc, 9vdc, 12vdc, and some 9 & 12vAC.
---------------------
Objectives:
1) To reduce the clutter inside my rack, and beneath my DAW desk.
2) To possibly improve sound via better power.
3) One box.
4) To keep me busy for a while. :roll:
--------------------------
Here go the newb questions:
a) Should I build several PSU's according to my voltage needs ?...or is there a way to use one PSU for all voltages needed ?
b) Can too much available current be disagreeable to some units ?
c) AC warts inside are just a tranny?
d) How would you approach this?
I know there might be some product out there that does this, perhaps for guitarists stomp-boxes....and there used to be a product by "Juice Goose" I think.
thx,
-=FB=-
---------------------
Objectives:
1) To reduce the clutter inside my rack, and beneath my DAW desk.
2) To possibly improve sound via better power.
3) One box.
4) To keep me busy for a while. :roll:
--------------------------
Here go the newb questions:
a) Should I build several PSU's according to my voltage needs ?...or is there a way to use one PSU for all voltages needed ?
b) Can too much available current be disagreeable to some units ?
c) AC warts inside are just a tranny?
d) How would you approach this?
I know there might be some product out there that does this, perhaps for guitarists stomp-boxes....and there used to be a product by "Juice Goose" I think.
thx,
-=FB=-