solderspongebob
Well-known member
I self-etch a lot of little project boards and have a Top Tip:
In the UK, we have a limescale cleaning product called "Lime Light" - you know, the stuff you use on taps and stainless steel kitchen sinks.
I discovered that it cleans copper in seconds! Gets rid of any tarnishing from finger prints much easier and less destructive than wire wool.
So if you like to remove the etch resist and tin-plate, this stuff cleans the tracks up beautifully in between processes!
In the UK, we have a limescale cleaning product called "Lime Light" - you know, the stuff you use on taps and stainless steel kitchen sinks.
I discovered that it cleans copper in seconds! Gets rid of any tarnishing from finger prints much easier and less destructive than wire wool.
So if you like to remove the etch resist and tin-plate, this stuff cleans the tracks up beautifully in between processes!