I found the difference in resistors values between N12 and N12K schematics. 10 times on each resistor - 500kohm or 50kohm.
I'm guessing that this not depend on PSU circuit because difference is mostly in type of rectifiing parts.
Could this be a simple mistake in writing? ...
R21-R29? Hmm... Most of people use 8 resistors? Drawing looks like 8? Why 9?
Popularized clone circuit use 0,4Mohm resistors...
Now back to the original circuit.
0,4Mohm lin. (0,05Mohm / Wid.) - guessing - 0,4Mohm linear (0,05Mohm / Widerstand (which means resistor))
Logic tells me that this means 0,4Mohm linear potentiometr and in the parentheses is equivalent circuit for resistor stepped switch.
Since resistors are connected in series:
8 x 0,05Mohm = 0,4Mohm - best match if i'm right
8 x 0,5Mohm = 4Mohm
8 x 0,4Mohm = 3,2Mohm
Best will be get the original AKG switch box
Someone have it?
I'm guessing that this not depend on PSU circuit because difference is mostly in type of rectifiing parts.
Could this be a simple mistake in writing? ...
R21-R29? Hmm... Most of people use 8 resistors? Drawing looks like 8? Why 9?
Popularized clone circuit use 0,4Mohm resistors...
Now back to the original circuit.
0,4Mohm lin. (0,05Mohm / Wid.) - guessing - 0,4Mohm linear (0,05Mohm / Widerstand (which means resistor))
Logic tells me that this means 0,4Mohm linear potentiometr and in the parentheses is equivalent circuit for resistor stepped switch.
Since resistors are connected in series:
8 x 0,05Mohm = 0,4Mohm - best match if i'm right
8 x 0,5Mohm = 4Mohm
8 x 0,4Mohm = 3,2Mohm
Best will be get the original AKG switch box
Someone have it?