Amek M2500 console bus balancing

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Here are some pictures of the Gl122 PCB:
https://www.dropbox.com/sh/2grvimxd7ecktt9/AABYo3oJUzwA3bnNARfLtKvsa?dl=0

Both electrolytics are a bit big for the PCB. They were newly installed back when I recapped the desk. In original state there were 2x 100uF/6,3V tantalums parallel instead of the smaller 220uF electrolytic. And the other spot had a 100uF/6,3V tantalum as output coupling cap which has been replaced with a 470uF cap. The red Wimas are 0,1uF bypass caps.
 
Back
Top